The principle of the product is the same as the sealed type power transformer. The basic elements of amorphous alloy are iron, nickel, cobalt, silicon, boron carbon, etc. It is a soft magnetic material and its magnetizing power is low. The amorphous alloy iron is extremely thin with 0.027mm. Lamination coefficient is low with 0.75-0.8. The electrical resistivity is very high and is 3 to 6 times the silicon steel plates. The hardness is 5 times that of silicon steel sheets. No-load loss of SH15-M-30~2500/6~10 series products decreased by 70% on the basis of GB/T6541 standard value.
1. The transformer core is made of amorphous alloy strips.
2. Low-voltage windings adopts copper foil coils and a cylindrical structure. High-voltage windings use a multi-layer cylindrical structure to balance the ampere-turn distribution of the windings and minimize magnetic leakage.
3. The transformer connection type adopts Dyn11 to reduce the impact of harmonics on the power grid and improve the power supply quality.
4. The oil tank is corrugated structure, the cover and the edge of the box are completely welded or fastened with bolts in two types, which fundamentally prolongs the service life of the transformer oil and insulating materials.
5. All fasteners with special anti-loosening treatment.
6. The transformer adopts vacuum oil injection, which can completely eliminate bubbles in the coil and ensure stable insulation performance.
The transformer can convert the voltage of the grid into the voltage required by the system or the load, and realize the transmission and distribution of electric energy. The transformer can replace the silicon steel sheet iron core transformer and is widely used in outdoor power distribution system. A large number of this product into the network operation can achieve good energy saving effect and can reduce the pollution to the atmosphere. This product is especially suitable for power shortage and load fluctuations and areas difficult to carry out daily maintenance. The transformer adopts a fully sealed structure, protecting the insulating oil and the insulating medium from being polluted by the atmosphere, so it can operate in a humid environment. It is the ideal distribution equipment in the vast distribution network for urban and rural areas.
Product parameters
SH15-M fully sealed oil-immersed amorphous alloy distribution transformer
Rated Capacity (kVA) |
Voltage Combination and Tap Range |
Vector Group Symbol |
No-load Loss |
Load Loss W |
Impedance Voltage |
No-load Current |
High Voltage (KV) |
High Voltage Tap Range (%) |
Low Voltage (KV) |
W |
Yy |
Dy |
% |
% |
30 |
6 6.3 10 10.5 11 |
±5% or ±2×2.5% |
0.4 |
Yyn0 or Dyn11 |
33 |
600 |
630 |
4 |
1.5 |
50 |
43 |
870 |
910 |
1.2 |
63 |
50 |
1040 |
1090 |
1.1 |
80 |
60 |
1250 |
1310 |
1.0 |
100 |
75 |
1500 |
1580 |
0.9 |
125 |
85 |
1800 |
1890 |
0.8 |
160 |
100 |
2200 |
2310 |
0.6 |
200 |
120 |
2600 |
2730 |
0.6 |
250 |
140 |
3050 |
3200 |
0.6 |
315 |
170 |
3650 |
3830 |
0.5 |
400 |
200 |
4300 |
4520 |
0.5 |
500 |
240 |
5150 |
5410 |
0.5 |
630 |
320 |
6200 |
6200 |
4.5 |
0.3 |
800 |
380 |
7500 |
7500 |
0.3 |
1000 |
450 |
10300 |
10300 |
0.3 |
1250 |
530 |
12000 |
12000 |
0.2 |
1600 |
630 |
14500 |
14500 |
0.2 |
2000 |
750 |
18300 |
18300 |
5 |
0.2 |
2500 |
900 |
21200 |
21200 |
0.2 |
Environmental conditions
1. High ambient temperature:+40ºC
2. Low ambient temperature: -25ºC
3. Maximum daily average temperature:+30ºC
4. Maximum annual average temperature:+20ºC
5. Altitude: <1000m
6. According to user requirements, transformers can be operated under special conditions.
Implementation standards
1. GB1094.1-2-2013 Power Transformer
2. GB/T6451-2015 Three-phase oil-immersed transformer technical parameters and requirements
3. GB1094.3-2017 Power Transformer
4. GB311.1-1997 Insulation coordination of high-voltage transmission and transformation equipment
5. JB/T10318-2002 Technical parameters and requirements for oil immersed amorphous alloy iron core distribution transformers
6. Q/SIHG1-1999 SBH15-M type amorphous alloy iron core sealed three-phase oil immersed distribution transformer
More Products
Product applications scenarios
Workshop
Company profile
Xuzhou Wojifan Electrical Equipment Co., Ltd. Was established in August 2024. The address is located in Pizhou Electronics Industrial Park, Jiangsu Province. Located at the junction of Jiangsu, Shandong, Henan and Anhui provinces, the transportation is extremely convenient and the transportation conditions are unique.
Xuzhou Wojifan Electrical Equipment Co., Ltd. Mainly produces S13, S20, S22 series 10KV, 20KV, 35KV oil-immersed power transformers; SH15 amorphous alloy transformer; SCB12, SCB13, SCB14, SCB18 series 10KV, 20KV, 35KV epoxy resin cast dry type power transformers; SCBH15 amorphous alloy transformer; SGB series non-encapsulated dry power transformer, low loss power transformer such as on-load voltage regulation; Combined American type, box-type substation, etc. The technical standard strictly adopts the international GB10941-2013; GB/T6451-2015, GB/T1094.11-2007/GB/T10228-2015 standards.
Our advantagesOur company has won the trust and support of our customers with its excellent quality, comprehensive service and honest cooperation. In addition to the domestic market, our products are exported to Central Europe, Eastern Europe, Southeast Asia, the Middle East, Africa, America, Australia and other regions and countries.
In line with the principle of integrity and honesty, we provide perfect services for new and old customers, so that you can get affordable products, assured equipment and thoughtful service. We provide you with professional technical solutions and services. If you have any problem, please feel free to contact us and our technicians will find a complete solution for you.