Power Transmission Equipment Scb10-800kVA 10kv 10.5kv 11kv Customized Epoxy Resin Transformer for Reliable Energy Distribution

• Customization: Available
• Application: Power, Lighting
• Phase: Three
• Model NO.: SCB10-800/10/0.4
• Cooling Method: Dry-type Transformer
• Winding Type: Two-winding Transformer
• Certification: ISO9001
• Usage: Single-phase Transformer, Combined Transformer, Power Transformer, Distribution Transformer
• Frequency Characteristics: Low Frequency
• Shape of Core: EE
• Brand: Vouchivan
• Series No.: Scb10 Series
• Voltage: 10kv
• Winding Material: Copper/Aluminum
• Core Material: Silicon Steel Sheet
• Capacity: 30kVA-2500kVA
• Connection Type: Dyn11
• No-Load Loss: 190W-3600W
• Load Loss: 710-17100W
• Impedance: 4%-6%
• Frequency: 50Hz/60Hz
• Voltage Regulator: 5 Steps
• Tapping Range: ±5% or ±2×2.5%
• Protective Enclosure: IP20/IP30/IP40
• Outline Shape: Vertical Transformer
• Operating Temperature: -25ºC to 40ºC
• Transport Package: Foam, Wooden Box, Cardboard, etc
• Specification: SCB10-800KVA
• Trademark: Vouchivan
• Origin: Jiangsu Xuzhou

Product Description

Resin insulated dry-type transformer, due to the coil is encapsulated by epoxy resin, so it is flame retardant, fireproof, explosion-proof, maintenance-free, non-polluting, small in size, and can be directly placed in the load center. With scientific and reasonable design and casting process, the product has smaller partial discharge, low noise, strong heat dissipation ability, and can be operated for a long time under 125% of the rated load under the condition of forced aircooling, and is equipped with a temperature controller, which has the functions of fault alarm, over-temperature alarm, over-temperature trip, and black-box function, and is connected to the computer through the RS485 serial interface to enable centralized monitoring and control.

1. High-voltage winding adopts filler epoxy resin vacuum casting, small partial discharge, high electrical strength of the coil, the inner and outer walls of the winding are reinforced with glass fiber mesh spacing, which increases the mechanical strength of the coil and improves the product's ability to resist sudden short-circuiting, and the coil never cracks.
2. Low-voltage winding adopts foil structure, which solves the problem of axial helix angle when winding with wire and makes the ampere-turns more balanced, meanwhile, the coil adopts axial cooling duct to enhance the heat dissipation ability, and epoxy resin is adopted between the winding layers, and integral curing and molding.
3. The core is made of high-quality cold-rolled silicon steel sheet, the core column is tied with Fclass latitude-free tape, and the surface of the core is encapsulated with epoxy resin, which reduces the no-load loss, no-load current and noise of the core.The clamps and fasteners are treated with special surface treatment, which further improves the product appearance quality.
4. Adopting cross-flow side-blowing cooling fan, the cooling fan has the characteristics of low noise, high wind pressure, beautiful appearance, etc., which enhances the overload capacity of the transformer. Temperature control adopts only temperature controller, which improves the reliability of transformer operation.

Product parameters

SCB10 series 10KV dry-type power transformer

Environmental conditions
1. High ambient temperature: +40ºC
2. Low ambient temperature: -25ºC
3. Maximum daily average temperature: +30ºC
4. Maximum annual average temperature: +20ºC
5. Altitude: <1000m
6. Installation location: Install in a place free of fire, explosion hazard and chemical corrosive gas and well ventilated areas.

Implementation standards
GB6450-19861 Dry-type Transformer

Applications
More productsWorkshop

Company profile
Xuzhou Wojifan Electrical Equipment Co., Ltd. Was established in August 2024. The address is located in Pizhou Electronics Industrial Park, Jiangsu Province. Located at the junction of Jiangsu, Shandong, Henan and Anhui provinces, the transportation is extremely convenient and the transportation conditions are unique.

Xuzhou Wojifan Electrical Equipment Co., Ltd. Mainly produces S13, S20, S22 series 10KV, 20KV, 35KV oil-immersed power transformers; SH15 amorphous alloy transformer; SCB12, SCB13, SCB14, SCB18 series 10KV, 20KV, 35KV epoxy resin cast dry type power transformers; SCBH15 amorphous alloy transformer; SGB series non-encapsulated dry power transformer, low loss power transformer such as on-load voltage regulation; Combined American type, box-type substation, etc. The technical standard strictly adopts the international GB10941-2013; GB/T6451-2015, GB/T1094.11-2007/GB/T10228-2015 standards.

Our advantagesOur company has won the trust and support of our customers with its excellent quality, comprehensive service and honest cooperation. In addition to the domestic market, our products are exported to Central Europe, Eastern Europe, Southeast Asia, the Middle East, Africa, America, Australia and other regions and countries.

In line with the principle of integrity and honesty, we provide perfect services for new and old customers, so that you can get affordable products, assured equipment and thoughtful service. We provide you with professional technical solutions and services. If you have any problem, please feel free to contact us and our technicians will find a complete solution for you.