| Customization: | Available |
|---|---|
| Certification: | VDE, CCC, ISO9001 |
| Shell Material: | Stainless Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ZHCS is suitable for power distribution systems in power plants, petroleum, chemical, metallurgy, textile, high-rise buildings and other industries. In large power plants, petrochemical systems and other places with high automation and computer interface requirements, it is used as a low-voltage complete distribution device for power distribution, motor centralized control and non-power compensation in power generation and supply systems with a three-phase AC frequency of 50 (60) Hz, a rated working voltage of 380V (400V), (660V), and a rated current of 6300A or less.
Function:Incoming cabinets, outgoing cabinets, busbar cabinets, metering cabinets, PT cabinets, lifting cabinets, etc. are indicated by wiring scheme numbers; according to the type of main switch components, they are divided into: load switch cabinets, load switch-fuse combination cabinets, circuit breaker cabinets and isolation switch cabinets, etc., respectively indicated by F (fuse combination electrical appliances), V (circuit breaker), C (load switch)
1.The main frame adopts 8MF open steel, and the two sides of the steel have installation holes with modules of 20mm, 100mm and 9.2mm
respectively, which makes the internal installation flexible and convenient;
2.The main frame assembly form is designed in two ways, full assembly structure and partial (side frame and beam) welding structure, for
users to choose;
3.The functional rooms of the device are isolated from each other, and the compartments are divided into functional unit room, busbar room
and cable room, and the functions of each room are relatively independent;
4.The Bingping main busbar adopts a horizontal arrangement behind the cabinet to enhance the busbar's ability to resist electric power, which
is a basic measure to make the main circuit of the device have high short-circuit strength;
5.The design of the cable compartment makes it very convenient for cables to enter and exit.
6.The dimensions of the general cabinet of the device (see the table below)
Functional Unit
The selection principle of the main electrical components is based on the introduction of technology, which can be mass-produced in series and meet the high performance requirements of the device.
1. The AH series is mainly selected for the power supply and feeder unit circuit breakers. Other more advanced M series produced by Sch n e i d e r and
F series produced by A B B can also be selected. AH type circuit breakers have the characteristics of good performance, compact structure, light
weight and strong series. The price is relatively low, maintenance and use are convenient, and various performance indicators can meet the
requirements of this device;
2. The SM1, TG, and TM30 series molded case circuit breakers are mainly selected for the drawer unit (motor control unit, part of the feeder unit).
These switches have good performance, compact structure, short arcing or no arcing, and high technical and economic indicators, which can
meet the requirements of this device;
3. The 0 series is selected for the disconnector and fuse disconnector. This series has high reliability, strong breaking capacity, and can realize
mechanical interlocking;
4. The NT series is mainly selected for the fuse;
5. The B series and LC1-D series are selected for the AC contactor.
Xuzhou Wojifan Electrical Equipment Co., Ltd. Was established in August 2024. The address is located in Pizhou Electronics Industrial Park, Jiangsu Province. Located at the junction of Jiangsu, Shandong, Henan and Anhui provinces, the transportation is extremely convenient and the transportation conditions are unique.
Xuzhou Wojifan Electrical Equipment Co., Ltd. Mainly produces S13, S20, S22 series 10KV, 20KV, 35KV oil-immersed power transformers; SH15 amorphous alloy transformer; SCB12, SCB13, SCB14, SCB18 series 10KV, 20KV, 35KV epoxy resin cast dry type power transformers; SCBH15 amorphous alloy transformer; SGB series non-encapsulated dry power transformer, low loss power transformer such as on-load voltage regulation; Combined American type, box-type substation, etc. The technical standard strictly adopts the international GB10941-2013; GB/T6451-2015, GB/T1094.11-2007/GB/T10228-2015 standards.
Q:Who are you?
A:Vouchivan is a company in growth. We have reached many of our goals, and established solid marketing foundation in many countries.
Q:Are you a manufacturer or a trading company?
A:We are a professional transformer manufacturer with more than 20 year's experience.Support OEM&ODM.
Q:Which markets do you mostly export to?
A:We are exporting to more than 20 countries in South America, North America, Europe, Middle East, Africa and so on.
Q:What certificates and standards do you have?
A:ISO9001-2008, OHSAS 18001:2007, ISO4001:2004L certificates. A:IEC, ANSI, KEMA, GOST standard.
Q:How long is your delivery time?
A:After determining the plan, we will complete production and shipping within 20 days. It mainly depends on the quantity.
Q:What is the standard of package?
A:Our nomal package are divided into three types:wooden pallets, wooden frames, and wooden boxes.Also it can be customized.
Q:What currencies and payment Type do you support?
A:Payment Currency:USD,CNY.
Payment Type:T/T,L/C.
Q:Why choose Vouchivan?
A:After comparing the quality, delivery and price of the same products, believe you will choose Vouchivan.
){kind=link}