Gzdw Intelligent High Frequency Switching DC Power Supply Distribution Cabinet High and Low Voltage Switch Cabinet

• Customization: Available
• Type: Power
• Structure: Fixed Board
• Model NO.: GZDW
• Certification: ISO9001:2000, CCC
• Form: All- packaged Type
• Operation Voltage: Low Voltage
• Size: 1 Uint
• Application Range: High-rise Buildings
• Shell Material: Stainless Steel
• Shell Protection Grade: IP30
• Brand: Vouchivan
• Current: AC
• Voltage: 400V
• Frequency: 50/60Hz
• Phase: 3 Phase
• Capacity: 100ah
• Output DC Voltage Rating: 10-48V
• Output DC Current Value: 5A-250A
• Voltage Adjustment Range: 10ah-400ah
• Overall Noise: 55dB
• Installation: Fixed
• Protection Class: IP20-IP30
• Single Unit Size: 2000*800*800mm
• Single Gross Weight: 1.5kg
• Way of Working: Continuously Working
• Transport Package: Foam, Wooden Box, Cardboard, etc
• Specification: GZDW
• Trademark: Vouchivan
• Origin: Jiangsu Xuzhou

Product Description

GZDW series high frequency switching DC power supply panel is a complete set of DC power supply devices designed and produced by our company according to GB/T 19826-2005 and DL/T 459-2002 standards by combining years of technical experience and production system management. It is an essential DC power supply system for the current power distribution system. It has been widely used in transformer substation and switching station of different voltage levels from 500KV to 10KV, power plant of 15MW~60MW generator set, national key projects such as subway, oil field, chemical industry, metallurgy, etc., as dc power supply of normal and accident loads such as control, signal and accident lighting, it can realize unattended. It is the ideal replacement of traditional DC power supply.

Main Features
Display Operation Unit:
This panel adopts new PMS intelligent touchable interface display which is not only intuitive, but also very easy for setting system running parameters. Up to 255 parameters pictures can display nearly all running parameters including voltage value of every battery unit (or every battery group). Advanced touchable interface display replaces traditional push buttons, which can increase system reliability further.

AC power Distribution Unit:
Using 2 ways of AC charging power supply lines, users can access 1 or 2 ways according to actual conditions. The system is distributed to each power module according to the principle of first route priority power supply.

Power output unit:
It selects high frequency switching power supply module and uses N+1 mode. After the failure of individual modules, it will automatically exit operation without affecting the normal operation of the system. The reliability of the whole system is improved. The module can be live plugged, which makes the maintenance work very simple. The high frequency switching power module uses power factor correction technology and phase correction technology to reduce the influence of the system on the computer harmonica. The double closed loop voltage and current regulation technology and the unique current bending current sharing technology make the distribution of the output current of each module reasonable and effective, and ensure the power system is always in the best operation status.

Monitoring unit:
It uses high performance microcomputer, scans and controls each unit in the system in real time, and provides high quality DC output to the control bus. At the same time, its V-T curve controls the equalizing charge voltage and floating charge voltage of the battery, according to the ambient temperature parameters of battery operation, ensuring the battery is full capacity and in good condition. In addition, the monitoring system monitors the voltage curve of each battery, so as to facilitate the timely deletion of the battery.

Technical Parameter

Schematic Diagram of Structure

Environmental Conditions
1. Ambient Temperature: No more than +50ºC and no less than -10ºC.
2. Altitude: No more than 2000m.
3. Relative Humidity: the average daily value is no more than 95%; the average monthly value is no more than 90%.
4. Earthquake Intensity: No more than 8 degrees.
5. Installation locations: without fire, explosion danger, serious pollution, chemical corrosion and violent vibration.
6. Installation Site: Indoor.
7. Installation mode: anchor bolt. welded.

Application
Company Profile
Xuzhou Wojifan Electrical Equipment Co., Ltd. Was established in August 2024. The address is located in Pizhou Electronics Industrial Park, Jiangsu Province. Located at the junction of Jiangsu, Shandong, Henan and Anhui provinces, the transportation is extremely convenient and the transportation conditions are unique.

Xuzhou Wojifan Electrical Equipment Co., Ltd. Mainly produces S13, S20, S22 series 10KV, 20KV, 35KV oil-immersed power transformers; SH15 amorphous alloy transformer; SCB12, SCB13, SCB14, SCB18 series 10KV, 20KV, 35KV epoxy resin cast dry type power transformers; SCBH15 amorphous alloy transformer; SGB series non-encapsulated dry power transformer, low loss power transformer such as on-load voltage regulation; Combined American type, box-type substation, etc. The technical standard strictly adopts the international GB10941-2013; GB/T6451-2015, GB/T1094.11-2007/GB/T10228-2015 standards.

Production Equipment
Service

Packing and delivery

Our advantages
Our company has won the trust and support of our customers with its excellent quality, comprehensive service and honest cooperation. In addition to the domestic market, our products are exported to Central Europe, Eastern Europe, Southeast Asia, the Middle East, Africa, America, Australia and other regions and countries.

In line with the principle of integrity and honesty, we provide perfect services for new and old customers, so that you can get affordable products, assured equipment and thoughtful service. We provide you with professional technical solutions and services. If you have any problem, please feel free to contact us and our technicians will find a complete solution for you.