GGD type low voltage fixed switchgear is suitable for three-phase AC 50/60HZ, max voltage AC 690V, rated current to 3150A power distribution system , it is widely used in power plants, substations, industrial and mining enterprises etc energy consumer and using for power, lighting ,control motor starting and distribution equipment for electrical energy conversion, distribution and control purposes.
GGD type LV low voltage distribution cabinet is based on the higher charge of energy department and the power consumers and design department requirements , the principle of safety, economy, reasonable, reliable design of new type low-voltage distribution cabinet . The products with high breaking capacity, dynamic thermal stability, electrical flexible, convenient combination, a series of practical., novel structure, high protection level, which can be used as a replacement of low voltage switchgear.
Features
1. Strong applicability, wide selection of main components, many domestic and imported brand products are interchangeable.
2. Good installation flexibility, even if the relevant departments force to phase out certain products in the future, because the GGD type cabinet has good installation flexibility, it will not cause installation troubles due to the modification or update of components.
3. The parts adopt modular standard design, with mold mounting holes, general coefficients, etc.
4. According to the design requirements of industrial products, use the golden ratio method to design the cabinet body and the division size of each part, so that the whole cabinet is beautiful and refreshing.
5. The GGD cabinet is designed with full consideration of the heat dissipation problem during the operation of the cabinet.
6. The top cover of the cabinet can be removed when needed, which is convenient for the assembly and adjustment of the main bus on site.
7. The four corners of the cabinet top are equipped with lifting rings for lifting and shipping.
8. The protection level of the whole cabinet is IP30, and users can also choose between IP20-IP40 according to the requirements of the site environment.
Technical parameter
Overall and mounting dimensions(mm)
Operating conditions
1. Ambient air temperature: -30ºC~+50ºC and the average temperature should not exceed +50ºC in 24h.
2. Indoor altitude above sea level: Maximum installation altitude: 2500m.
3. Relative humidity should not exceed 50% at max temperature +40ºC. Higher relative humidity is allowed at lower temperature. Ex. 90% at +20ºC. But in view of the temperature change, it is possible that moderate dews will produce casually.
4. No fire, explosion danger, serious pollution, chemical corrosion and severe vibration
5. Installation gradient not exceed 5°.
6. The equipment shall be installed in a place where there is no violent vibration and impact, and the place where the electrical components are not corroded.
7. Any specific requirement, consult with manufacture.
Standards
· GB 7251.1 Low-voltage switchgear and control equipment: Part 1 type test and partial type test equipment;
· IEC60439-1 Low Voltage Switchgear and Control Equipment Components: Part I, Type Testing and Partial Type Testing Components;
· IEC60529 determines the degree of protection of the enclosure and the corresponding standards.
Job siteCompany profile
Xuzhou Wojifan Electrical Equipment Co., Ltd. Was established in August 2024. The address is located in Pizhou Electronics Industrial Park, Jiangsu Province. Located at the junction of Jiangsu, Shandong, Henan and Anhui provinces, the transportation is extremely convenient and the transportation conditions are unique.
Xuzhou Wojifan Electrical Equipment Co., Ltd. Mainly produces S13, S20, S22 series 10KV, 20KV, 35KV oil-immersed power transformers; SH15 amorphous alloy transformer; SCB12, SCB13, SCB14, SCB18 series 10KV, 20KV, 35KV epoxy resin cast dry type power transformers; SCBH15 amorphous alloy transformer; SGB series non-encapsulated dry power transformer, low loss power transformer such as on-load voltage regulation; Combined American type, box-type substation, etc. The technical standard strictly adopts the international GB10941-2013; GB/T6451-2015, GB/T1094.11-2007/GB/T10228-2015 standards.
Producing facility
Service
Packing and delivery
Our advantagesOur company has won the trust and support of our customers with its excellent quality, comprehensive service and honest cooperation. In addition to the domestic market, our products are exported to Central Europe, Eastern Europe, Southeast Asia, the Middle East, Africa, America, Australia and other regions and countries.
In line with the principle of integrity and honesty, we provide perfect services for new and old customers, so that you can get affordable products, assured equipment and thoughtful service. We provide you with professional technical solutions and services. If you have any problem, please feel free to contact us and our technicians will find a complete solution for you.
Audited Supplier 
){kind=link}