630kVA Step up Step Down Sgb10 Series 6/6.3/10/10.5/11kv Unpacked Dry Type Transformer with Toroidal Coil Structure

• Customization: Available
• Application: Power
• Phase: Three
• Model NO.: SGB10-630/10/0.4
• Cooling Method: Dry-type Transformer
• Winding Type: Two-winding Transformer
• Certification: ISO9001
• Usage: Single-phase Transformer, Combined Transformer, Power Transformer, Distribution Transformer
• Frequency Characteristics: Low Frequency
• Shape of Core: EE
• Brand: Vouchivan
• Series No.: Sgb10 Series
• Input Voltage: 6kv, 10kv, 35kv
• Low Voltage: 0.4kv
• Winding Material: Copper/Aluminum
• Capacity: 30kVA-2500kVA
• No-Load Loss: 190W-3600W
• Load Loss: 760-18400W
• Connection Type: Dyn11
• Impedance: 4%-6%
• Tapping Range: ±5% or ±2×2.5%
• Frequency: 50Hz/60Hz
• Efficiency: 98%
• Core Material: Metal Foil
• Coil Structure: Toroidal
• Moisture-Proof Method: Open
• Transport Package: Foam, Wooden Box, Cardboard, etc
• Specification: SGB10-630KVA
• Trademark: Vouchivan
• Origin: Jiangsu Xuzhou

Product Description

The SG10 model new product is the dry type transformer owning highest safety performance presently. The transformer use class C heat-resistant NOMEX paper as insulation, so that the products can reach the requirements of fireproof and waterproof and meet the requirements of environmental protection. During the whole service life, the dry type transformer is extremely good electric performance and mechanical performance. Aging and shrinkage resistance and compression resistance, combined with more powerful elastic , which can make sure that the transformer even use several years later, the coil remain tight structure, and be able to withstand short circuit pressure. Transformer's insulation class is H grade. The transformer is suitable for high fire safety requirements, big load fluctuation and filthy wet environments.

Product features

Safe environmental protection, high insulation level, no melting under the 250ºC, no toxic gases released under the 750ºC, no burning fuel and combustion-supporting under 800ºC, flame light for about 40 minutes, no harm to human body, and also no pollution to the environment. The product can run normally and safely under 120% overload, it also can run at full load under IP23 condition without any forced-air cooling.

Product parameters

SGB10 Type full- sealed cast resin power distribution transformer

Environmental conditions
1. High ambient temperature: +40ºC
2. Low ambient temperature: -25ºC
3. Maximum daily average temperature: +30ºC
4. Maximum annual average temperature: +20ºC
5. Altitude: <1000m
6. Installation location: Install in a place free of fire, explosion hazard and chemical corrosive gas and well ventilated areas.
Provision of GB6450-1986 "dry type power transformer", the revising is supposed to be done according to international related regulation provided the ambient highest temperature exceeds 40ºC and altitude is higher than 1000m, it suggests customer to mark out in ordering process.

Implementation standards
GB6450-19861 Dry-type Transformer

Scope of application
Installation case
More productsWorkshop

Company profile
Xuzhou Wojifan Electrical Equipment Co., Ltd. Was established in August 2024. The address is located in Pizhou Electronics Industrial Park, Jiangsu Province. Located at the junction of Jiangsu, Shandong, Henan and Anhui provinces, the transportation is extremely convenient and the transportation conditions are unique.

Xuzhou Wojifan Electrical Equipment Co., Ltd. Mainly produces S13, S20, S22 series 10KV, 20KV, 35KV oil-immersed power transformers; SH15 amorphous alloy transformer; SCB12, SCB13, SCB14, SCB18 series 10KV, 20KV, 35KV epoxy resin cast dry type power transformers; SCBH15 amorphous alloy transformer; SGB series non-encapsulated dry power transformer, low loss power transformer such as on-load voltage regulation; Combined American type, box-type substation, etc. The technical standard strictly adopts the international GB10941-2013; GB/T6451-2015, GB/T1094.11-2007/GB/T10228-2015 standards.

Service

Packing and shipping
Our advantagesOur company has won the trust and support of our customers with its excellent quality, comprehensive service and honest cooperation. In addition to the domestic market, our products are exported to Central Europe, Eastern Europe, Southeast Asia, the Middle East, Africa, America, Australia and other regions and countries.

In line with the principle of integrity and honesty, we provide perfect services for new and old customers, so that you can get affordable products, assured equipment and thoughtful service. We provide you with professional technical solutions and services. If you have any problem, please feel free to contact us and our technicians will find a complete solution for you.