230V Residual Circuit Breaker with Over and Short Current Leakage Protection MCB

• Customization: Available
• Breaking Capacity: Low Voltage Circuit Breakers
• Operation: Electric Type
• Model NO.: L80EX
• Speed: Normal Type Circuit Breaker
• Arc-extinguishing Medium: Air
• Installation: Open Frame
• Structure: ELCB
• Poles Number: 2
• Type: Circuit Breaker
• Function: Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection), RCCB
• Certification: CE, CCC
• Frame Current: 100A
• Rated Current: 6/10/16/25/32/40/50/63/80A
• Rated Operating Frequency: 50/60Hz
• Rated Impulse Voltage: 500V
• Rated Voltage: 230/400V
• Pole: 1p+N/2p/3p+N/4p
• Trip Curve: C/D
• Remaining Action Type: AC or AC Type
• Rated Impulse Withstand Voltage: 4kv
• Rated Short-Circuit Breaking Capacity: 6/10ka
• Rated Working System: Uninterrupted Working System
• Mechanical Life: 20000times
• Electrical Life: 10000times
• Protection Degree: IP20
• Ambient Air Temperature: -5 - +40ºC
• Transport Package: Foam, Wooden Box, Cardboard, etc
• Specification: L80EX
• Trademark: Vouchivan
• Origin: Jiangsu Xuzhou

Product Description

Product Description

Product Superiority

1. Beautiful appearance, small size, compact structure
2. Set a variety of functions in one, strong protection ability
3. Modular design, maximum rated current up to 100A
4. The product has waterproof function design, and the protection ability is stronger

Matters Need Attention

1. The leakage circuit breaker shall not be attacked by rain or snow during transportation, storage and use.

2. Before installation, check whether the basic technical data of the label and the logo meet the requirements (the selected current size should be realistic use matches); manual operation several times the action should be flexible, confirm intact, before installation; when installing, wires that can withstand the corresponding carrying capacity should be selected and installed strictly according to the diagram.
3. Running check:

    3.1 Check whether the wiring is correct, especially to check that the input end of the leakage circuit breaker should be connected to

    3.2 Ensure that the screws of each terminal have pressed the wires and that the wires are in the corresponding wiring frame.

    3.3 Close the leakage circuit breaker and press the test button to check whether the leakage protection performance is normal and reliable. If the leakage circuit breaker can be disconnected normally, the indicator is red.

4. After the leakage circuit breaker runs for a certain time (generally one month), it is necessary to press the test button in the closed power state.

Check whether the leakage protection performance is normal and reliable (press the test button once a month, the leakage circuit breaker should be broken once); if the inspection fails, it should be unloaded and sent to the manufacturer for repair.

5. The neutral line (N) at the outgoing end can only serve as the working neutral line, not the protection neutral line.

6. When the leakage can exit model is selected, the leakage "exit" function of the circuit breaker is an emergency use function, only for professionals. It is used by power supply maintenance personnel during emergency maintenance. After maintenance, the leakage protection function must be put into the state immediately.

 

Company Profile

Xuzhou Wojifan Electrical Equipment Co., Ltd. Was established in August 2024. The address is located in Pizhou Electronics Industrial Park, Jiangsu Province. Located at the junction of Jiangsu, Shandong, Henan and Anhui provinces, the transportation is extremely convenient and the transportation conditions are unique.

Xuzhou Wojifan Electrical Equipment Co., Ltd. Mainly produces S13, S20, S22 series 10KV, 20KV, 35KV oil-immersed power transformers; SH15 amorphous alloy transformer; SCB12, SCB13, SCB14, SCB18 series 10KV, 20KV, 35KV epoxy resin cast dry type power transformers; SCBH15 amorphous alloy transformer; SGB series non-encapsulated dry power transformer, low loss power transformer such as on-load voltage regulation; Combined American type, box-type substation, etc. The technical standard strictly adopts the international GB10941-2013; GB/T6451-2015, GB/T1094.11-2007/GB/T10228-2015 standards.
 

Packaging & Shipping

Our Advantages

Our company has won the trust and support of our customers with its excellent quality, comprehensive service and honest cooperation. In addition to the domestic market, our products are exported to Central Europe, Eastern Europe, Southeast Asia, the Middle East, Africa, America, Australia and other regions and countries.

In line with the principle of integrity and honesty, we provide perfect services for new and old customers, so that you can get affordable products, assured equipment and thoughtful service. We provide you with professional technical solutions and services. If you have any problem, please feel free to contact us and our technicians will find a complete solution for you.
 

FAQ:

Q1: Can you customize my products or put my logo on your products?
A1: Yes, we offer OEM and ODM services. Please inform us formally before production.

Q2: What's your terms of payment?
A2: T/T 30%, 70% balanced paid before shipment.

Q3: Could I have prices of your products?
A3: Welcome. Please feel free to send us an inquiry here. We will reply you within 24 hours.

Q4: What's the lead time?
A4: It largely depends on order quantity. Please let us know your requirement, we will do our best to deliver the goods in time.