High Voltage Armored Cabinet Kyn61-40.5kv/3150A Hv Switchgear

• Customization: Available
• Certification: CCC, ISO9001
• Shell Material: Steel Plate
• Model NO.: KYN61-40.5KV/3150A
• Voltage Level: 40.5kv
• Installation: Fixed
• Structure: Withdrawable
• Current: AC
• Model No.: Kyn61 Series Enclosed Switchgear
• Frequecy: 50Hz
• Protection Level: IP4X
• Ambient Temperature: -25-40 Degrees
• Provide Machining Customization: Yes
• Structural Form Cabinet: Type
• Structural Form: Floor-Standing
• Use: Power Distribution
• 1min Power Frequency Withstand Voltage: 95 Kv
• Installation Method: Fixed
• Lightning Impulse Withstand Voltage: 185kv
• Scope of Application: Outdoor
• Place of Sale: Worldwide
• Transport Package: Wooden Case / According Customers′ Demands
• Specification: KYN61-40.5
• Trademark: Vouchivan
• Origin: Jiangsu Xuzhou
• HS Code: 8504333000
• Production Capacity: 50pieces/Day

Product Description

 

Product Description

KYN61-40.5 armored shift type AC metal closed switchgear is used in 40.5kV three-phase AC 50Hz power system, as power plants, substations and industrial and mining enterprises to accept and distribute electric energy; It has the functions of controlling, protecting and detecting the circuit. In addition to being widely used in general power systems, it can also be used in places with frequent operations.

Detailed Photos

Product Parameters

Main technical parameters of switchgear

Project		Unit	Data
Rated voltage		KV	40.5
Rated insulation level	1min.P.F. withstand voltage(phases to ground/gaps)	KV	95(lsolation fracture 115)
	Lightning impulse withstand voltage(phases to ground/gaps)	KV	185(lsolation fracture 115)
Rated frequency		Hz	50
Main busbar rated current		A	630- 2500  3150
Rated short-circuit breaking current		A	31.5
Rated short-time withstand current(4s)		KA	25
Rated peak withstand current		KA	31.5
Auxiliary control loop rating		V	25

ZN85-40.5Vacuum circuit breaker technical parameters

Project		Unit	Data
Rated voltage		KV	40.5
Rated insulation level	1min.P.F. withstand voltage(phases to ground/gaps)	KV	95(lsolation fracture 115)
	Lightning impulse withstand voltage(phases to ground/gaps)	KV	185(lsolation fracture 115)
Rated frequency		Hz	50
Rated current		A	600,1000,1250,1600   1250,1600,2000, 2500,3150
Rated short-circuit breaking current		A	25	31.5
Rated peak withstand current		KA	63           80
Rated operation sequence			O-0.3s-CO-180sCO
Rated short-circuit breaking current breaking times		time	20
Rated cable charging breaking current		A	25
Rated capacitor bank breaking current		A	400
Capacitive current opening and closing performance		garde	C2
Closing time		ms	40-100
Opening time		ms	30-60

VD4Vacuum circuit breaker technical parameters

Project		Unit	Data
Rated voltage		KV	40.5
Rated insulation level	1min.P.F. withstand voltage(phases to ground/gaps)	KV	95(lsolation fracture 115)
	Lightning impulse withstand voltage(phases to ground/gaps)	KV	185(lsolation fracture 115)
Rated frequency		Hz	50
Rated current		A	1250,1600,2000,2500,3150
Rated short-circuit breaking current		A	31.5

 

Installation Instructions

Conditions of Use

The altitude does nat exceed 1000m;
Ambient temperature:-25ºC-+40ºC;
The daily average is not more than 95%, and the monthly average is not more than 90%;
There are no flammable gases, explosion hazards, serious contamination, chemical corrosion and freguent severe vibrations.

Special use environmental conditions
1,When the switchgear is used under normal environmental conditions as specified in this instruction manual, the company andthe user may negotiate and agree on special operating conditions that exceed normal operating conditions.
2,In order to prevent condensation, the swltch cabinet is equlpped with a heater. When the switchgear is in standby, it should beput into use.Even in normal operation, you should pay attention to the application.
3,The heat dissipation problem of the switchgear can be salved by additional ventilation.

Main feature
The cabinet is made of aluminum-zinc plate and processed by CNC equipment. lt is formed by bolting or riveting. The
structure is fully assembled.
lt can be equipped with 2N85-40.5 vacuum circuit breaker handcart, VN1, VD4 or HD4 vacuum circuit breaker handcart. Themain busbar of the switchgear can be connected without transition cabinet.
The space of the cable room is suficient, and the air clearance can be ensured to be more than 300mm. There is no need toinstall insulation spacers between the phases.
 

Factory environment

Applicable scene

Our Advantages